Graphite Electrode Product Parameters
| Nomina diameter | RP | HP | UHP | ||||
| Current Carrying Capacity | Current Density | Current Carrying Capacity | Current Density | Current Carrying Capacity | Current Density | ||
| in | mm | A | A/cm2 | A | A/cm2 | A | A/cm2 |
| 12 | 300 | 10000-13000 | 14-18 | 13000-17400 | 17-24 | 15000-22000 | 20-30 |
| 14 | 350 | 13500-18000 | 14-18 | 17400-24000 | 17-24 | 20000-30000 | 20-30 |
| 16 | 400 | 18000-23500 | 14-18 | 21000-31000 | 16-24 | 25000-40000 | 19-30 |
| 18 | 450 | 22000-27000 | 13-17 | 25000-40000 | 15-24 | 32000-45000 | 19-27 |
| 20 | 500 | 25000-32000 | 13-16 | 30000-48000 | 15-24 | 38000-55000 | 18-27 |
| 22 | 550 | 32000-40000 | 13-16 | 35000-55000 | 14-22 | 42000-64000 | 17-26 |
| 24 | 600 | 35000-41000 | 13-15 | 41000-61000 | 14-21 | 50000-73000 | 17-25 |
| 28 | 700 | 39000-48000 | 10-12 | 55000-82000 | 14-21 | 67000-99000 | 17-25 |
| 32 | 800 | 43000-54000 | 8-10 | / | / | / | / |
Welcome to contact us for quotation.
Address:Huafu Commercial Center, Wenfeng District, Anyang City, Henan Province, China
EAF graphite electrodes are purpose-built components designed to optimize the performance of Electric Arc Furnaces (EAFs), where they serve as the critical link between electrical power and the high-temperature processes required for steelmaking. These electrodes are engineered to handle the unique demands of EAFs-from melting massive scrap charges to enabling precise metallurgical control.
Operational Responsibilities
Arc Stability: The graphite tip descends into the furnace to form an arc with the molten bath. For large EAFs (200+ tons), 600–750 mm electrodes maintain stable arcs despite fluctuating scrap loads, preventing arc extinction (which halts production).
Power Transmission: EAF graphite electrodes conduct up to 120 kA of current, converting electrical energy into heat with 90–95% efficiency. Their low resistivity minimizes energy waste, a key factor in EAFs' cost competitiveness.
Bath Homogenization: Current flow induces electromagnetic stirring, ensuring uniform temperature and chemical composition in the molten bath. This is critical for alloying (e.g., adding Cr, Ni) and removing impurities like phosphorus.
Design Adaptations for EAFs
Tapered Profiles: 1–2° tapers reduce hot spots at the tip, extending life by 20–30% compared to straight electrodes.
Multi-Electrode Stacking: Threaded ends allow vertical stacking of 3–6 electrodes, enabling high-amperage current transmission (up to 120 kA) in large EAFs.
Hot Tags: eaf graphite electrodes for arc furnaces, China eaf graphite electrodes for arc furnaces manufacturers, suppliers, factory, 500mm graphite electrode for energy management plants, 500mm graphite electrode for ingot casting, 500mm graphite electrode for ingot casting plants, 500mm graphite electrode with good mechanical properties, 500mm graphite electrode for enhancing steel plant competitiveness through innovation, 500mm graphite electrode for special steel production










