News

An HP graphite electrode is a resistor shaped like a column. Between the power supply and the arc, current passes through the body, the nipple, the...

A furnace transformer is ordered to a round figure — 20 MVA, 30 MVA, 45 MVA — and the electrode diameter is often settled afterwards, by what is av...

An HP graphite electrode spends its working life in a hostile place. It sits at the centre of an electric arc furnace, carries current at 17–22 A/c...

Most mills do not move from RP to HP graphite electrodes because the furnace changed. They move because the operating point changed: a heavier powe...

A high power graphite electrode is not a cosmetic tier sitting somewhere between standard and high-specification stock. It is a defined grade, and ...

Thermal expansion sets how much a column grows between a cold start and a hot campaign, and that growth is what loads the joint. RP graphite carrie...

Electrical resistivity decides how much of the power you deliver becomes heat inside the electrode instead of heat in the arc. At the RP limit of 8...

Select an RP electrode in five steps: confirm the furnace parameters, fix the diameter from current density, match length and nipple type, verify t...

RP and HP graphite electrodes sit in different current density bands, RP below 17 A/cm² and HP at 17 to 22 A/cm², and HP holds tighter ceilings on ...

A regular power (RP) graphite electrode is the grade built for furnaces that carry less than 17 A/cm²: resistivity at or below 8.0 μΩ·m, bulk densi...

Graphite electrode for ferroalloy production is an RP duty: submerged-arc ferroalloy and silicon furnaces run RP graphite electrodes because the cu...

A graphite electrode COA is usable only if it names the batch, grade and test method behind each figure. Graphite electrode electrical resistivity ...