Graphite Electrode Product Parameters
| Nomina diameter | RP | HP | UHP | ||||
| Current Carrying Capacity | Current Density | Current Carrying Capacity | Current Density | Current Carrying Capacity | Current Density | ||
| in | mm | A | A/cm2 | A | A/cm2 | A | A/cm2 |
| 12 | 300 | 10000-13000 | 14-18 | 13000-17400 | 17-24 | 15000-22000 | 20-30 |
| 14 | 350 | 13500-18000 | 14-18 | 17400-24000 | 17-24 | 20000-30000 | 20-30 |
| 16 | 400 | 18000-23500 | 14-18 | 21000-31000 | 16-24 | 25000-40000 | 19-30 |
| 18 | 450 | 22000-27000 | 13-17 | 25000-40000 | 15-24 | 32000-45000 | 19-27 |
| 20 | 500 | 25000-32000 | 13-16 | 30000-48000 | 15-24 | 38000-55000 | 18-27 |
| 22 | 550 | 32000-40000 | 13-16 | 35000-55000 | 14-22 | 42000-64000 | 17-26 |
| 24 | 600 | 35000-41000 | 13-15 | 41000-61000 | 14-21 | 50000-73000 | 17-25 |
| 28 | 700 | 39000-48000 | 10-12 | 55000-82000 | 14-21 | 67000-99000 | 17-25 |
| 32 | 800 | 43000-54000 | 8-10 | / | / | / | / |
Welcome to contact us for quotation.
Address:Huafu Commercial Center, Wenfeng District, Anyang City, Henan Province, China
Carbon graphite electrodes (100–750 mm) combine the electrical conductivity of graphite with the structural integrity of carbon, making them ideal for high-temperature industrial applications like EAFs, LFs, and electrolysis cells. These electrodes are engineered to balance conductivity, thermal stability, and mechanical strength, addressing the demanding conditions of modern metallurgy.
Material Synergy: Carbon graphite electrodes are manufactured by blending graphite particles with a carbon binder (e.g., petroleum coke, coal tar pitch), then sintering at 2,500–3,000°C. This process creates a dense, isotropic material with:
•High Electrical Conductivity: 10–30% higher than standard graphite due to optimized carbon particle alignment.
•Low Porosity: <10% porosity (vs. 15–20% for standard graphite), reducing slag penetration and extending service life.
•Thermal Stability: Operating range up to 3,500°C, with minimal dimensional change (thermal expansion coefficient: 1–3 × 10⁻⁶/°C).
Applications in 100–750 mm Sizes:
•EAFs: 500–750 mm electrodes are standard for 100–300-ton EAFs, where they support 80–120 kA currents and sustain arcs for 60–90 minutes per heat.
•LFs: 300–500 mm electrodes refine molten steel by maintaining temperature (1,550–1,650°C) and enabling electromagnetic stirring, critical for desulfurization (removing S to <0.005%).
•Electrolysis Cells: Smaller diameters (100–200 mm) are used in aluminum smelting (Hall-Héroult process), where they conduct current to decompose alumina into aluminum.
Hot Tags: carbon graphite electrode 100-750mm, China carbon graphite electrode 100-750mm manufacturers, suppliers, factory, 600mm graphite electrode quality control, 600mm graphite electrode strength, 600mm graphite electrode for corporate social responsibility, project management with 600mm graphite electrode, customized 600mm graphite electrode, 600mm graphite electrode for marketing










