100-750mm Graphite Electrodes UHP HP RP Graphite Electrode for Eaf Lf Furnace
| RP (Regular Power) Graphite Electrode Standard: YB/T 4088-2000 | ||||
| Item | Unit | Diameter | ||
| Φ75-Φ300 | Φ350-Φ450 | Φ450-Φ500 | ||
| Electric resistivity≤ | μΩm | 4.5-8.0 | 4.5-8.0 | 4.5-8.0 |
| Flexure strength≥ | Mpa | 8.0-18.0 | 8.0-18.0 | 8.0-18.0 |
| Modulus of elasticity≤ | Gpa | 8.5-12.0 | 8.5-12.0 | 8.5-12.0 |
| Bulk Density≥ | g/cm3 | 1.60-1.80 | 1.60-1.80 | 1.60-1.80 |
| CTE(100-600ºC) ≤ | x10-6/ºC | 2.2-2.8 | 2.2-2.8 | 2.2-2.8 |
| Ash Content ≤ | % | 0.3 | 0.3 | 0.3 |
| HP (High Power) Graphite Electrode Standard: YB/T 4089-2000 | ||||
| Item | Unit | Diameter | ||
| Φ100-Φ400 | Φ450-Φ500 | Φ550-Φ600 | ||
| Electric resistivity≤ | μΩm | 3.8-6.2 | 3.8-6.2 | 3.8-6.2 |
| Flexure strength≥ | Mpa | 11.0-20.0 | 11.0-20.0 | 11.0-20.0 |
| Modulus of elasticity≤ | Gpa | 8.0-13.0 | 8.0-13.0 | 8.0-13.0 |
| Bulk Density≥ | g/cm3 | 1.65-1.85 | 1.65-1.85 | 1.65-1.85 |
| CTE(100-600ºC) ≤ | x10-6/ºC | 1.5-2.0 | 1.5-2.0 | 1.5-2.0 |
| Ash Content ≤ | % | 0.3 | 0.3 | 0.3 |
| UHP (Ultra-High Power) Graphite Electrode Standard: YB/T 4090-2000 | ||||
| Item | Unit | Diameter | ||
| Φ300-Φ400 | Φ450-Φ500 | Φ550-Φ700 | ||
| Electric resistivity≤ | μΩm | 3.0-5.5 | 3.0-5.5 | 3.0-5.5 |
| Flexure strength≥ | Mpa | 12.0-25.0 | 12.0-25.0 | 12.0-25.0 |
| Modulus of elasticity≤ | Gpa | 16.0 | 16.0 | 16.0 |
| Bulk Density≥ | g/cm3 | 1.70-1.90 | 1.70-1.90 | 1.70-1.90 |
| CTE(100-600ºC) ≤ | x10-6/ºC | 0.8-1.4 | 0.8-1.4 | 0.8-1.4 |
| Ash Content ≤ | % | 0.2 | 0.2 | 0.2 |
What is an electrode for an electric furnace?
An electrode for an electric furnace is a critical component that conducts electrical current into the furnace to generate the intense heat required for various industrial processes, such as melting metals, refining materials, or producing chemicals. These electrodes are typically made from conductive materials like carbon or graphite, chosen for their ability to withstand extreme temperatures and maintain electrical conductivity. In electric arc furnaces (EAFs), which are commonly used in steelmaking, the electrodes are the primary source of heat, creating an electric arc between the electrode tip and the metal charge. This arc can reach temperatures exceeding 3,000°C (5,432°F), sufficient to melt steel and other metals.
The design and material of the electrode depend on the specific application. For instance, graphite electrodes are preferred in high-power EAFs due to their superior conductivity, low electrical resistance, and ability to endure rapid temperature changes. Carbon electrodes, on the other hand, are often used in lower-power furnaces or for non-ferrous metal processing. The size and shape of the electrode also vary; larger electrodes are used in high-capacity furnaces to handle higher current loads.
Hot Tags: electrode for electric furnace, China electrode for electric furnace manufacturers, suppliers, factory, 400mm graphite electrode for climate change mitigation applications










